16-2
IM AQ1300-01EN
16.2 Messages and Corrective Actions
Error Messages
Messages may appear on the screen while you are using the AQ1300 or AQ1301. This section
explains the meanings of the error messages and how to respond to them. You can display the error
messages in English or Japanese (see section 14.1). If servicing is necessary to solve the problem
indicated by a message, contact your nearest YOKOGAWA dealer.
Other error messages related to the setup software may also appear. These messages are described
in the
Setup Software User’s Manual
, IM AQ1300-61EN.
Error
Number
Message
Solution
1001
File Operation Error.
Make sure that the directory or file that you are trying to access exists. Or,
in the System screen, initialize the settings to their factory default values.
1004
Failed to access to the file.
1005
The file/folder doesn’t exist.
1008
The file already exists.
1010
Failed to open the file.
1011
Insufficient disk space.
Delete unnecessary files and directories.
1012
The file/folder doesn’t exist.
Make sure that the directory or file that you are trying to access exists. Or,
in the System screen, initialize the settings to their factory default values.
1013
Failed to access to the file.
1014
The file/folder doesn’t exist.
1015
It cannot be copied or deleted due to the
nested structure.
Change the directory structure so that all path names are shorter than
200 characters.
1250
The file is in use.
Wait a moment, and then try again.
1251
No USB memory.
Make sure that a USB memory device is connected.
1252
Formatting failed.
After restarting the AQ1300 or AQ1301, in system settings, initialize it.
1253
Invalid file name.
Check the file name.
1254
Too long path name.
1255
Unreadable file.
Check that the file you tried to load is the correct file.
1257
Cannot be loaded.
Update the firmware.
1260
Unreadable setup/result file.
The file may be corrupt.
In the System screen, initialize the settings to their factory default values.
1261
Save Error.
1262
Load Error.
1264
Detect Bad Container.
1265
Load Error for “DisManage.dmf”.
Use the setup software to create new setup file list data.
1266
Load Error for “DisManage.dmf”.
(Bad Version)
1267
Load Error for “DisManage.dmf”.
(Bed Language)
1268
Invalid file name or folder name.
Check the file name or directory name that you specified.
1269
Invalid path name.
Check the file path that you specified.
1270
Destination and Source is same folder.
Specify the correct directory name.
1271
Detect VersionUp Failure...
Please Retry...
Upgrade the firmware again.
1272
Fail Getting Address...
Check the source and destination addresses and the network settings of
the device under measurement.
1273
Load Error(Bad Measurement Type).
(This File is for “Auto”.)
Make sure that the current test type and the file test type match.
1274
Load Error(Bad Measurement Type).
(This File is for “Auto(Remote)”.)
1275
Load Error(Bad Measurement Type).
(This File is for “Manual”.)
1276
Bad Passward.
Check the password setting in the network settings in system settings.
1277
Connection Timeout.
Check the source and destination addresses and the network settings of
the device under measurement.
1278
In USB Storage mode, all keys are locked.
Please disconnect the USB Cable.
Remove the USB cable first before operating. To use USB
communication, in system settings, set USB Function to
Control I/O
.
1279
Fail verionup!
Retry after reboot.
Update the system again.
