18-6
IM AQ1200-01EN
18.2 Saving and Loading Data
• When you are using the multi-core fiber measurement feature
File Name Type of Measured Waveform Data (.SOR)
On the project setup screen, select one of the following combination options (see section 16.1).
• WL + No.
• No. + WL
• Project Name + WL + No.
• No. + Project Name + WL
• WL + Project Name + No.
For details on the number (ID No.), see the previous table.
File Name of Storage Files (.MPZ)
Storage files are saved with the same name as the project name that has been assigned on the
top view screen or project setup screen (see section 16.3).
• When you are using a feature other than the OTDR, fault-locator, or multi-core fiber
measurement
Select one of the following combinations.
No., Comment, C No., No. + Comment
For details on the number (ID No.) and comment, see the previous table.
String and Character Types That Can Be Used in File and Folder Names
There are limitations on the types of strings and characters that you can use in file and folder
names.
• The following character strings cannot be used as file or folder names due to MS-DOS
limitations.
AUX, CON, PRN, NUL, CLOCK, CLOCK$, LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7,
LPT8, LPT9, COM0, COM1, COM2, COM3, COM4, COM5, COM6, COM7, COM8, COM9
• The following types of characters can be used: 0 to 9, A to Z, a to z, _, –, =, (, ), {, }, [, ], #, $, %, &,
~, !, `,and @.
@ cannot be entered consecutively.
• Make sure that the full file path (absolute path from the root folder) is less than or equal to
200 characters in length. If it exceeds 200 characters, an error occurs when you perform a file
operation (such as saving, copying, renaming, or creating a folder).
Full file path: When an operation is being performed on a folder, the full path is up to the name of the
folder.
When an operation is being performed on a file, the full path is up to the name of the file.
Label
When you are using the OTDR or fault-locator feature, you can specify the following items. If you save
waveform data measured from an optical pulse to a file in SOR format, the following label information
is also saved.
Company name
Up to 36 characters
Name
Up to 36 characters
Cable ID
Up to 36 characters
Fiber ID
Up to 36 characters
Fiber type
652:SMF
653:DSF
655:NZ-DSF
651:MMF
Single-mode fiber
Dispersion-shifted fiber
Non-zero, dispersion-shifted, single-mode fiber
Multi-mode fiber
Cable code
Up to 36 characters
Start position
Up to 36 characters
End position
Up to 36 characters
Current data flag
Shows the operation state.
BUILT (BC), REPAIRED (RC), OTHER (OT), and CURRENT (CC)
