YOKOGAWA 701925 PBDH0500 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 38

YOKOGAWA 701925 PBDH0500 Скачать руководство пользователя страница 25

10

IM 701925-01EN

Probe Head End

4.

Pass the lead wire through the heat-shrink tube.

The heat-shrink tube

for the probe-head end is not included. It must be obtained separately

.

5.

Solder the core wire of the lead wire to the flanged pin

.

6.

Cover the flanged pin with a heat-shrink tube, and then apply heat
with a drier to fix the tube in place.

4.0 mm

(soldering

not allowed)

φ2.0 mm

or less

Flanged pin

Cover with a heat-shrink tube

Solder

Core wire

Lead wire

Heat-shrink tube (not included)

Note

• If solder gets into the soldering-not-allowed part (4 mm from the tip of the

flanged pin), the probe may be damaged. Also, do not cover the part with the
heat-shrink tube.

• Make sure that the diameter of the tube after shrinking is 2.0 mm or less. If

the maximum diameter exceeds 2.0 mm, the lead wire cannot pass through
the retaining cover.

Attaching the Retaining Cover

7.

Pass the flanged sections of the two input pins through the center
retaining-cover holes, and place the input pins on the holders on
either side

.

3. Operating Procedure

«
...
23
24
25
26
27
...
»

Содержание 701925 PBDH0500







































Отзывы:

Нет отзывов