7
IM 700938-01E
Product Overview
This instrument is a power supply for probes.
Two power supply receptacles are provided on the front panel, and this allows
two probes to be used simultaneously.
Names of Parts
Made in Japan
MODEL
NO.
POWER SUPPLY
POWER
PROBE
1
2
Power
supply
receptacles
Fuse holder
Power indicator
Power supply
connector
Voltage
viewing
window
ON
Power
switch
OFF
Grounding terminal
Front view
Rear view
Measurement Procedure
Preparations
CAUTION
Before turning on the power, make sure that the voltage of the power
supply being used matches the supply voltage indicated on the rear panel
of the unit.
1
Turn the power switch off and connect the power cord.
2
Insert the power supply plug for the DL Series wide band current probe
that you are using into the power receptacle on this instrument.
3
Turn the power switch ON, and check that the front panel power indicator
lights.
Measurement Procedure
Refer to the user’s manual of the current probe you are using (model 700937,
701930, 701931, 701932 or 701933).
Note
• When using the Current Prove (Model 701930, 701931, 701932 or 701933)
together with this power supply, you may not be able to use a second current
probe simultaneously depending on the value of the curernt being measured.
• The current consumption of the probe is dependent upon the value of the current
being measured. Do not let the total current consumption of the probe exceed the
rated output current of the 700938. See figure 1.