YOKOGAWA 53005-E, Руководство пользователя, Страница: 19 / 24

[Delete all the temperature records]
“CLR” is displayed on LCD, and all the
temperature records are deleted.
After the deletion, the HOLD mode is
restored. 1
Press the SET button
during the CALL mode.
When the MEASURE button is
pressed while the DIP switch is adjusted
to the CONT. side (Refer to “DIP switch
setting” in page 7.),
“CONT” is lit on
LCD and continuous measurement is
started. Measurement continues even if
releasing the MEASURE button.
1
When the MEASURE button is
pressed again or the DIP switch is
changed over to the NOR. side, the
mode is changed to HOLD. 2
For 53006, continuous measurement can be performed without pressing the MEASURE button.
Perform the following steps.
Press once
19
*Laser beam is not radiated during the continuous measurement mode.
Continuous Measurement
Press once
NOR. CONT.
NOR. CONT.
SET
53005-6E 12.5.12 10:04 AM ページ 19