Lenovo Yoga Tablet 2 Hardware Maintenance Manual
32
Removing the 1080 main board
Follow the steps below to remove this FRU.
When handling the printed circuit board (PCB), bear the following in mind:
Be careful not to drop the PCB onto a hard surface, such as metal, wood, or composite
materials.
Handle the PCB gently.
Do not stack the PCB with other materials.
Only place the PCB on surfaces covered with such materials as an ESD mat or
conductive corrugated plate.
Prepare for this step by:
Removing the following FRU:
o
1010 rear cover on page 13.
Detaching the following FPCs from the main board:
o
Battery FPC (see step 1 on page 16 in 1020 right speaker).
o
LCD FPC (see step 2 on page 25 and Step 3 on page 26 in 1050 LCD FPC).
o
Main FPC (see step 2 on page 28 in 1060 Main FPC).
1.
Unlock the connector of the TP FPC on the main board using a guitar pick as shown in the
figure below.
Figure 8-1. Unlocking the connector of the TP FPC
