Yoer TFC04G CASCADO, Руководство пользователя

Страница: 15 / 20

ENGLISH
15
OPERATING INSTRUCTIONS
1. Insert the plug to an electrical outlet. Current room temperature will be shown
on the display.
2. Press button to turn on the unit.
3. Press button to adjust the fan speed to the desired level: low, medium or high.
4. Press button to select operation mode:
a) NORMAL mode - fan works at the chosen speed.
b) NATURAL mode - fan imitates the flow of natural wind based on chosen speed.
c) SLEEP mode - fan will start working at chosen speed and it will begin
gradually reducing its work speed to the lowest level. LED display will fade out after
30 seconds of operation.
d) CHILD mode - fan will automatically set up timer to 3 hours, oscillation
and ionizer function will start. The device will start working at the highest speed
and will begin gradually reducing its speed to the lowest level. The LED display will
turn off after 30 seconds of operation. You can turn oscillation function off at any
time.
5. To use the cooler functionality, turn off the fan and unplug it. Open the water reservoir
lid and fill the reservoir with clean, cold water.
Make sure not to exceed the “MAX”
level on the indicator at the front of the device. Next, plug in the device, turn it on and
enable the functionality with the button.
In order to increase the sensation of cooling, it is recommended
to additionally put a cooling insert previously kept in the freezer for about 8
hours into the water reservoir.
IMPORTANT:
When water level gets to “MIN” on the indicator, turn the fan off, unplug
it and refill the water reservoir. Next, plug the device back in, turn it on and enable
the cooler functionality again. Do not allow the device to function in cooler mode with
the water reservoir empty as it may cause damage.
6. By using button you can set the time after which the fan should stop working
(from 1 hour to 12 hours).
7. Press button to start or to stop oscillation function.
8. Press button to start or to stop ionizer function.