ENGLISH
23
3. Carefully take hold of the heater and adjust the mounting screws
to the round holes on the back of the unit. To lodge the heater in
its final position, move the device slightly downwards.
USING THE DEVICE
TURNING THE DEVICE ON
Plug in the device. The device will enter standby mode.
Press
to turn on the heater. On the display, there will be shown current room temperature. If is it lower
than the set temperature, the heater will start operating. An icon indicating heating will appear on the
display.
SETTING THE TEMPERATURE
When the device is turned on, use
„+” and „-” to change the set temperature. The temperature range is
from 5 to 50
°C.
SETTING THE TIMER
AUTOMATIC TURNING ON
To set the time after which the timer will turn off the heater, press
while the device is turned on.
Select the number of hours by pressing
to reach the desired value within the range of 0-24 h. During
the hour setting, the numbers on the display will blink. To apply the selected setting, wait until they stop
blinking. The display will alternate between showing the current ambient temperature and the set
number on the timer. To cancel the timer setting, set the number of hours to '0' or turn off the heater.
