ENGLISH
14
DISPLAY
INSTALLING FEET
TIP:
If you want to wall-
mount the device, do not install feet and move on to the “WALL MOUNTING”
section.
Necessary tools (not supplied):
Screwdriver.
1. Put the unit on a table covered with a soft cloth or towel in such a way as to have its bottom part
stick out a bit over the edge. Alternatively, while holding it up, put the unit vertically, upside down.
2. Screw in the feet using the 8 supplied short screws. The orientation of the feet does not matter.
3. Carefully put the heater on the installed feet and make sure it is stable. If the heater is loose,
screw the feet in tighter.
WALL MOUNTING
IMPORTANT:
If you do not have the necessary skills and/or tools, hire a qualified technician.
Measure mounting holes so that they are at least 450 mm from the floor and at least 1100 mm
from the ceiling/other things mounted on the wall. Do not mount the heater around very
combustible things such as window covers, curtains etc.
Necessary tools (not supplied):
Drill
6 mm size drill bit appropriate for the given surface
Hammer
Screwdriver
WiFi connection indicator
Icon indicating that the
currently displayed value
is temperature
Heating indicator
Control panel lock
Comfort mode
Eco mode
Antifreeze mode
Temperature / time
Icon indicating that the
currently displayed value is
time/timer active indicator
