Yoder Smokers YS S Series Скачать руководство пользователя страница 7

Страница: 7 / 68

DANGERS, WARNINGS, AND CAUTIONS

Many parts of the grill will become intensely hot

during operation. Please use caution to avoid burns

both during operation and afterwards while the grill

is still hot.
•

Never

leave the grill unattended with young

children present.
•

Never

move the grill during operation.

•

Always

allow the grill to cool before moving.

• Assemble and operate this grill

ONLY

per

the instructions in the Assembly Guide and the

Owner’s Manual.
• The grill is intended for outdoor use only.
• Never use heating fuel pellets in the grill, due to

potential hazardous contaminants and additives

that may be present.

• Always store pellets in dry location. Pellets

exposed to moisture will not burn properly and

affect the proper operation of the grill. If wet pellets

are left in the hopper, they lock up the auger.
• Keep the grill clean per this manual.
• Do not modify or use accessories not specified

for use with this grill.
• If your previous cooks have produced large

quantities of flammable grease, it is highly

recommended that the grease be cleaned

from the grill before cooking on it again.
• Keep the grill unplugged while not in use.
• After a period of non-use, the hopper, auger,

and firepot must be inspected for obstruction.

• When operating this grill, maintain a

MINIMUM

distance of 18 inches (46 cm) between the grill and

any walls or combustible surfaces. See diagram

below.
• When operating the grill under overhead

combustibles or covered patios, a

MINIMUM

40 inches (102 cm) is required.

• The smoker must be level front to back, but it is

not required to be level from left to right as long

as the drip bucket end of the cooker is the lowest

point — otherwise problems with grease running

towards the burn pot could result in a grease fire.

WARNING!

Burn Hazard:

WARNING!

Air Contaminant Hazard:

CAUTION!

Best Practices:

WARNING!

Fire Hazard:

18in. (46cm)

PROPOSITION 65 STATEMENT

WARNING: Combustion byproducts

near this cooker include carbon monoxide,

a chemical known to the

State of California to cause birth defects

or other reproductive harm.

Содержание YS S Series





































































Результаты поиска

Содержание YS S Series

Отзывы:

Похожие инструкции для YS S Series

Бренды по названию

Популярные бренды

Yoder Smokers YS S Series, Руководство по эксплуатации

Результаты поиска

Содержание YS S Series

Отзывы:

Похожие инструкции для YS S Series

Бренды по названию

Популярные бренды