SLEEP
The SLEEP function allows a gradual raising of the set temperature of a room in cooling season, and a
gradual dropping of the set temperature of a room in heating season. This function is designed to reduce
energy usage while you sleep or the room is not in use, while maintaining the room comfortable.
In the COOL or DEHUMIDIFY mode, the temperature will increase by 1°F after the unit runs under Sleep 1
Mode for 1 hour, and will increase another 1°F the following hour. Once the room temperature has increased
2°F, the unit will maintain this temperature until SLEEP mode is turned off.
In the HEAT mode, the temperature will decrease by 1°F after the unit runs in Sleep 1 Mode for 1 hour, and will
decrease another 1°F the following hour. Once the room temperature has decreased 2°F, the unit will maintain
this temperature until SLEEP mode is turned off.
To turn ON the SLEEP function, press the Function button repeatedly, until the SLEEP icon appears on the
LED Display of the Wall Mount Control. When the SLEEP icon blinks, press the Enter/Cancel button to turn the
function ON. The SLEEP icon will remain on the display.
To turn OFF the SLEEP function, press the Function button repeatedly, until the SLEEP icon appears on the
LED Display of the Wall Mount Control. When the SLEEP icon blinks, press the Enter/Cancel button to turn the
function OFF. The SLEEP icon will no longer appear on the display.
TURBO
TURBO function is designed to allow you to reach the set temperature in your room as quickly as your system
is capable.
While your Indoor Unit is in the COOL or HEAT mode, press the Function button, until the Wall Mount Control
selects the TURBO interface. Press the Enter/Cancel button to turn ON the TURBO function. The TURBO icon
will appear on your Wall Mount Control’s LED Screen.
To turn OFF the TURBO function, press the Function button until TURBO is selected, and press Enter/Cancel
button. The TURBO icon on the display will disappear.
While your Indoor Unit is in the COOL or HEAT mode, press the Function button, until the Wall Mount Control
selects the TURBO interface. Press the Enter/Cancel button to turn ON the TURBO function.
REMOTE CONTROL FUNCTIONS
5
YMGI Group • 601 Arrow Ln, O’Fallon, MO 63366 • [email protected] • ymgigroup.com • 866-833-3138
MIN
I SPL
ITS
•
VRF
•
PTAC
•
SOLAR
•
LED
LIG
HT
IN
G
Your Modern Green Idea
1
