REMOTE CONTROL FUNCTIONS
4
YMGI Group • 601 Arrow Ln, O’Fallon, MO 63366 • [email protected] • ymgigroup.com • 866-833-3138
MIN
I SPL
ITS
•
VRF
•
PTAC
•
SOLAR
•
LED
LIG
HT
IN
G
Your Modern Green Idea
SETTING THE ON/OFF TIMER
When your Indoor Unit is ON, press Timer to set TIMER ON/OFF.
The Timer range is 0.5 – 24 hours. Each press of the or button will increase or decrease the set value by
0.5 hours. If you hold the button down, the time increment will increase or decrease by 0.5 hours every half
second.
TIMER ON
When your Indoor Unit is turned OFF, you can set the ON Timer by pressing the TIMER button. The LED
Display will show “XX.X HOUR”, with “HOUR” blinking. This indicates how long the system should wait before
turning your Indoor Unit ON.
TIMER OFF
When your Indoor Unit is turned ON, you can set the OFF Timer by pressing the TIMER button. The LED
Display will show “XX.X HOUR”, with “HOUR” blinking. This indicates how long the system will run before
turning your Indoor Unit OFF.
If the LED Display does not display the “XX.X HOUR” icon, it means the Timer setting has been cancelled.
The Function button will allow you to operate SWING, SLEEP, TURBO and Blow functions. You will need to
press the button to cycle through the different features the Function button controls.
SWING
On select models of Indoor Units, the Swing function operates the motorized air louvers. This helps circulate
air in a room, and can alleviate warm or cold spots.
To turn ON the SWING function, press the Function button repeatedly, until the SWING icon appears on the
LED Display of the Wall Mount Control. When the SWING icon blinks, press the Enter/Cancel button to turn the
function ON. The SWING icon will remain on the display.
To turn OFF the SWING function, press the Function button repeatedly, until the SWING icon appears on the
LED Display of the Wall Mount Control. While the SWING icon blinks, press the Enter/Cancel button to turn the
function OFF. The SWING icon will no longer appear on the display.
If you do not press the Enter/Cancel button to turn ON/OFF the function, the Wall Mount Control will continue
its preset operation after 5 seconds.
