YMGI 584 Series, Руководство пользователя

Страница: 4 / 8

4
YMGI Group • 601 Arrow Ln, O’Fallon, MO 63366 • info@ymgigroup.com • ymgigroup.com • 866-833-3138
MIN
I SPL
ITS
•
VRF
•
PTAC
• SOLAR
•
LED
LIG
HT
IN
G
YMGI
Your Modern Green Idea
FAN button
Pressing this button can set fan speed cycle: auto (AUTO), low ( ), medium ( ), high ( ). Auto
Notes:
• Under AUTO speed, air conditioner will select proper fan speed automatically according to factory set -
tings
• Fan speed under dry mode is low speed.
SWING button
Press this button can select up & down swing angle. Fan blowing angle can be selected cycled through as
below:
When selecting “ “, the air conditioner is blowing fan automatically. The horizontal louver will automatically
swing up & down at maximum angle.
• When selecting “
“, the air conditioner is blowing the fan at a fixed position. Horizontal
louver will stop at a fixed position.
• When selecting “ “, the air conditioner is blowing the fan at a fixed position. Horizontal louver
will blow air at a fixed position.
• Hold “ “ button above 2s to set your required swing angle. When it reaches your desired angle, release
the button.
Note:
may not be available. When air conditioner receives this signal, the air conditioner will turn on the
fan automatically.
TURBO button
Under COOL or HEAT mode, press this button to turn for quick COOL or quick HEAT mode. “ “ icon is dis -
played on remote controller. Press this button again to exit turbo function and “ “ icon will disappear.
/ button
• Press “ “ or “ “ button once increase or decrease set temperature 1°C (1°F). Holding “ “ or “ “ but -
ton, 2s later, set temperature on remote controller will change quickly. Release the button after finished
adjusting the setting, the temperature indicator on indoor unit will change accordingly. (Temperature canot
be adjusted under auto mode)
• When setting TIMER ON, TIMER OFF or CLOCK, press “ “ or “ “ button to adjust time. (Refer to CLOCK,
TIMER ON, TIMER OFF buttons) When setting TIMER ON, TIMER OFF or CLOCK, press “ “ or “ “ button
to adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF buttons)
SLEEP button
Under COOL, HEAT or DRY mode, press this button to start up sleep function. “ “ icon is displayed on re -
mote controller. Press this button again to cancel sleep function and “ “ icon will disappear.