YitaHome CZWRL-V3, Руководство по сборке

Страница: 2 / 23

1
1.Two or more people are required for the assembly.
2.Your heater was designed and approved for outdoor use only. Do NOT use inside a
building , garage , or any other enclosed area.
3.Make sure surrounding areas are free of combustible materials , gasoline , and other
flammable vapors or liquids.
4.Ensure that there is no obstruction to air ventilation. Be sure that all gas connections
are tight and that there are no leaks.
5.Be sure the cylinder cover is clear of debris. Ensure that any component removed during
assembly or servicing is replaced and fastened prior to operation.
6.Heater should be thoroughly inspected annually before each use by a qualified service
person. If relighting a hot heater , always wait at least 5 minutes.
7.Inspect the hose assembly for evidence of excessive abrasion , cuts , or wear. Suspected
areas should be leak tested. If the hose leaks
,
it must be replaced prior to operation.
Only use the replacement hose assembly specified by manufacturer.
8.Professional installation is highly recommended.
ASSEMBLY INSTRUCTIONS
Do not attempt to operate until you have read and understood all General
Safety Information in this manual and all assembly is complete with leak
checks performed!