Note: If there are modules left after unpacking, please lay them flat and repack them.
Figure 5
Figure 4
Figure 3
Figure 2
Figure 1
Unpacking Instruction
s
(for panels with a
leng
th
of
2
278
mm
and less
)
：
1. C
ut the two longitudinal security straps, then carefully cut
and remove the cardboard of one short side of the box, as
showed in Figure 1. Pay attention to not damage the
modules during the cutting process.
2. C
ut and remove the inner transverse security straps
around the modules, then remove the paper angles inside
the box,
as show
n
in Figure 2.
3. C
ut the cardboard of one long side of the box , then cut
the inner packing-belts around the modules and pallet, as
show
n
in Figure 3.
Pay attention to not damage the
modules during the cutting process.
4. S
lowly
pull
out the modules from the back side of the
module, as show
n
in Figure 4, then carry one module with
two people.
5. Do not place the package on a
tilt angle
of
more than 17
degrees. When unpacking on
a
non-horizontal
surface
,
measures
must
be
taken
to protect modules, as show
n
in
Figure 5.
YINGLISOLAR.COM
©
Yingli Energy Development Company Limited
GB Modules Installation and User Manual Page 1
1
