background image

Q U I C K S T A R T

For beginners, it is better to step on the proper area 

of the deck. Similar to the ski-board, keeping the feet in 
the middle of the front and back wheels to stand stably 
on the board and avoid turning up on one side.

The board may go into over-heat protection after long time 

riding. This is normal after up-climing in summer or riding on rocked 
road. The board will recovered automatically after a rest.

5

7

The head and tail indicators are on and can not be turned off while powered on. The tail indicator will be brighter 

while breaking which is not a waste of power.

It is not safe to ride on the slippery road  in rain. And also reduce the life of the board. Please not to ride in rain 

and keep the board dry.

Please always wear protective equipments and ride in familiar circumstance without traffic.

Please alway check your board before riding to ensure safety. Any problem, please feel free to contact us, 

and thanks for your support!

8

9

1 0

1 1

 

Speed Mode Switch

Fast Speed Mode: About 20KM/h
Low Speed Mode: About12KM/h

NOTE:

 

Changing speed mode should be operated before powering the remote.

The speed, accelerated speed and brake in low speed mode are weaker than in fast speed mode.

6

NOTE:

The lithum-ion battery will normally lose power in low temperature.
The battery capacity in winter is less than in summer which will 
automatically recovered as temperature going high. 
Low-Temp Protection: The battery will go with Low Temperature 
Protection at -10 C which will automatically recovered as temperature 
going high.
High-Temp Protection: The battery will go with High Temperature 
Protection at  4

0 C which will automatically recovered as tempera -

ture going low.

4

Содержание Y-ES0201










Отзывы: