Yiimix Y-ES0201, Руководство пользователя

Страница: 6 / 9

Start the board with pressing on the Power button on the top.
After starting, the boards head and tail indicators will turn on.
NOTE:
Power on the wierless control with the throttle located in the
middle. The left first indicator will fast flash in green while throttle
not in the middle.
All indicators slowly flash in green: Indicates the connection
between wireless controller and the board is failed, please move
the wireless controller close to the board.
All indicators in green: Fully charged. The indicators go out as the
power is deducing.
Only left first indicator in green: Low power. The speed will slowly
reduce to the low-speed mode, but the brake still as strong as
under the high-speed mode.
Antenna is placed in the top inside. Please don’t cover the
top while operating.
Wireless controller vibrates: Indicating that the connection
between controller and board is not good or failed. The board will
go on without power supply after 0.5s disconnection until
successfully reconnected.
1 2 3
Q U I C K S T A R T
Push the throttle to the front, the more you pushed the faster
you will go. Pull the throttle to the back, the more you pull the
stronger brake you will get.
4
Lithum-ion battery should be kept with 70% power capacity while long time no using.Please avoid to keep it with lower battery in long time
(more than two weeks). And recharge/discharge the battery every 3 months.