YIDIMU Panther, Руководство пользователя

Страница: 2 / 46

2
Precautions
Please keep in mind the following precautions during assembly
and use. Failure to follow these warnings may result in
damage to the machine or even personal injury.
1. There is a FEP film at the bottom of the resin vat. It can’t be
pierced or scratched by sharp objects. Otherwise, the machine
may not print properly.
2. The resin in the vat must be kept clean and free of cured resin
and floc.
3. During the printing process, try to keep the top cover closed and
keep the machine steady. Do not shake the machine.
4. After printing, turn off the power.
5. Please keep the equipment working on a stable surface.
6. If the power cord is damaged, the cable must be replaced by the
manufacturer.
7. Do not power off the device during its operation.
8. After the model is printed, use a scraper to remove, taking care
not to scratch your hand.
9. It is forbidden to print in the air (take off the resin vat or the vat
without resin). If printing the air is severe, the LCD screen will be
damaged.
10. After the skin touches the resin, please wash it in time.
11. If there is a model in the platform and resin vat after printing is
finished, do not press reset ( reset on the bottom ), otherwise it
will crush 2K screen.