11
Cleaning
1.
Unplug the power cord before cleaning.
2.
Clean the outer body with cloth. Do not immerse the outer body in water nor
pour water into it.
3.
Remove the condensation collector and clean it with damp cloth, and then
reinstall it.
4.
Rinse the underside of lid including the seal ring, pressure limit valve,
anti-block cover, air escape and float valve, then dry them off.
5.
Clean the inner pot with sponge or nonmetallic soft brush, and then wipe it
up. Be careful not to damage the inside coating.
For sealing ring cleaning, take hold of the handle on the sealing ring
supporting cover; in the meantime, pull the sealing ring upward. After
the cleaning, put the sealing ring supporting cover back. Note the side
with the handle should face outward. Please do not put it up side down.
(See picture 14 &15)
14
15
Pull
Push
For Anti-block cover cleaning, pull the cover outward, clean it, and
then place it back. (See picture 16 &17)
16
17
Pull
Push
Anti-block
cover
