10.3 function description
10.3.1 The three display states are as follows
：
10.3.3 Setup:
Long press the setting key for 3 seconds to enter the setting mode
or exit the current setting mode; In the setting mode, short press the
setting key to select the function option (f1-f2-f3-f4-f5),and press the
"+" / "-" key to modify the parameters.
10.3.4 Measurement temperature unit please select (F1):
In normal measurement mode, press the setting key for more than
3 seconds until the LCD displays F1 option; Press "+" to select Celsius
(
℃
), press "-" to select Fahrenheit (
℉
);Short press the setting key to
save the current selection and enter the next option, long press 3
seconds to save the current setting and exit the setting function.
10.3.5 Warning threshold setting (the back-lit displays red color
when the measurement exceeds this threshold):
Press the setting key to select the LCD display as F2; Press the
"+" / "-" key to modify the alarm temperature value (the lowest alarm
is 37
℃
); Short press the setting key to save the current selection and
enter the next option, long press 3 seconds to save the current setting
and exit the setting function.
10.3.2 Check the historical measurement temperature:
Normal
Temperature
Exceeding
Threshold
Article1
Article 20
Battery
Exhausted
08
09