8
Unpacking
IMPORTANT! Do not attempt to lift YG Acoustics™ Rack alone – your dealer
should install Rack for you using specialized tooling, and your assistance should
be limited to actions that do not require the use of high force. Even so, to avoid
possible injury, use extreme care during unpacking. Always stand as straight as
possible and use your leg muscles to lift any item. Do not lift while bending from
the waist. To avoid possible injury, always seek the advice of a qualified medical
professional if you suffer from any relevant medical condition, or if otherwise
applicable.
Note: When storing Rack in its shipping cartons (either before initially unpacking,
or after repacking), always place the cartons right side up. The internal foam
package will not endure prolonged placement on any side except the intended
bottom.
Each YG Acoustics™ Rack is packed in one or more cartons with a shipping weight of
up to approximately 82 kg (180 lbs). To avoid personal injury and possible product
damage, we strongly urge you to allow your dealer to perform the whole unpacking
process using specialized tooling.
To unpack Rack, perform the following steps:
1. Place the carton right side up. Carefully open the carton – never slice any deeper
than 6 mm (1/4”) into the carton to avoid damaging the Rack parts inside.
2. Carefully lift the parts one by one from the carton, and place them on a soft surface
for assembly.
3. Your dealer will at this point assemble Rack together using specialized tooling.
Always assemble all parts together securely, and make sure they cannot rattle or
otherwise loosen over time.
After unpacking, carefully inspect Rack for possible damage due to shipping. If you
discover any damage, immediately contact your YG Acoustics™ dealer for assistance.
Keep all packaging for future shipping.
In the unlikely event a product needs repair,
YG Acoustics™ will only accept units in their original shipping cartons. The use of any
other packaging may result in damage to the product that is not covered by the product’s
limited warranty.
Contents of the Cartons
Each carton contains several Rack parts, which vary by configuration (
fully read this
manual before using any of the supplied tools
).
Rack 1.3 is packaged in a single carton that contains the following parts:
Содержание RACK 1.3
Страница 1: ...1...
