YewdaleDefiant
®
programming instructions
Part no: 980001
4
Delete the limit stop position
(please note: the first limit position can’t be deleted)
Let the motor run to the
limit stop position that is to
be deleted.
Press PROG for
7 seconds.
Motor will shunt
once to indicate limit
setting mode.
Within 7 seconds the motor will
shunt once again. The preset
limt position is now cleared.
Limit position fine tuning:
Adjust to the
required position.
Press PROG for 1 second to save
the limit position.
(If there’s no other action within 30 seconds. the motor will exit from the limit position preparation automatically)
Press PROG for 1
second.
Motor will shunt once to
indicate limit setting mode.
Let the motor run into the
limit stop position that needs
fine tuning.
Motor will shunt again.
The fine tune setting has
been saved.
Programming Instructions
YewdaleDefiant
®
230v AC Tubular motor w/ Radio Receiver (980001)
Turn the motor off:
Press PROG on the
motor for 7 seconds.
Motor will beep and
shunt once.
Motor will beep again after
7 seconds. The motor has
been turned off.