YesCam Yes737, Руководство пользователя

Страница: 33 / 61

Yes737 Mega-pixel Pan/Tilt IP Camera
33
3.9. Speaker Alarm settings
The IP Camera provides speaker alarm function, a PIR or video motion detection
could trigger the speaker alarm. The duration of the alarm could also be set. The
related settings are explained below:
1. Speaker alarm trigger
– select the trigger mode of the speaker alarm
A. Motion trigger
– if this is selected, the speaker alarm signal will be active
when video motion is detected. The detection sensitivity is set In the “motion
d
etection” page.
B. PIR trigger
– if this is selected, the speaker alarm will work when the PIR
sensor is detected..
C. Schedule
– if this is selected, the speaker alarm is scheduled according to
the settings of scheduling in section 3.13.
D. Disable
–disable the speaker alarm.
2. Alarm loop times
– this is the number of the loop times of the speaker alarm.
Figure 3-15: Speaker Alarm Settings page