Yerasov SCS PB-4, Руководство пользователя

Страница: 4 / 8

9. Attention! All of the switches located on the
Pedal Board ' s inner circuit board are
depressed by default. If you are going to take a
pedal off the Pedal Board for some reason
(except the first and the last in line), please
press down the appropriate S1 (or S2) bypass
switch located on the Pedal Board
' s inner
circuit board to avoid a signal path ' s gap in the
effects sequence. Those switches are located
close to the Pedal Board
' s pedal connectors.
4
8. The SCS series has the FS-12 pedal, which
can be used either as a stand-alone device or
as a common bypass device for the whole
Pedal Board. In this case it should be placed
leftmost on the Pedal Board, while the
rightmost place must not be empty. The S3
switch located on the Pedal Board
' s inner
circuit board should be depressed when using
the FS-12. In any other case of using SCS
pedal in the leftmost position this switch should
be pressed down.
7. Connect the pedals to the Pedal Board with
the dedicated cables, which are supplied
accessories (spare cables included as well).