17
1)
1:1 Call at call mode
Press the
“Enter”
button for a long period(about 2seconds) at the general mode in order to enter into
the call mode.
①
Select your party to call by using the channel button (
▲
,
▼
). If you ( ID : 12345 ) want to call your
party(ID : 54321), select him(ID : 54321) by using the channel button
(
▲
,
▼
) at the call mode.
Figure 6-8) ID Selection
②
You can call the party (ID : 54321) by pressing the
“Enter”
button and then, the Radio of your
party(ID:54321) displays the ID number "12345". Even though your party’s Radio is in general
mode, the Radio will be converted to the call mode automatically.
Figure 6-9) ID Transmission
③
After the call is completed, the Transmission and the Reception have no restriction, which
means that the TX/RX will be free.
2)
2) Group(1:N) Call at call mode
①
In order to make the Group call at the call mode, the following should be set up at the PC
programming.
②
If the 1
st
party (ID:53579) and the 2
nd
party(ID:52468) are in one group, the "5AAAA"which is a
call number / call name(example : baseball player) should be designated. ("A" means that all the
numbers are applied.)
3)
If the caller makes a call to the group of baseball players, the caller’s Radio should press the
“Menu”
and
“
▲
”
buttons at the same time after selecting the party with ID “1AAAA”. In this case, the Radios
of the party1 and the party2 display the ID "1AAAA". In case of the group call, the party’s Radio
displays the group ID number.
After the call is completed, the Transmission and the Reception have no restriction, which means that
the TX/RX will be free.
