14
Specifications of DC-1000/DC-2000 Charger :
• INPUT VOLTAGE
: DC+10.5V
• BATTERY
: XSB-2400
• QUICK CHARGING TIME
: In 4Hours and half
• OPERATION TEMPERATURE
: 0
℃
~+50
℃
• SIZE
: 90(W)x105(D)x37(H)m/m
•
Charging
:
750mA(Fast
charging)
6. Operating Instructions of XR-150/XR-450 Series Radio
6.1 Power On/Off
Turn Power switch clockwise. As soon as power is supplied, the backlight will be turned on.
If the user had set up the user ID, it will be displayed on the LCD and radio will enter into the latest state as a
signal sound is generated.
☞
Caution) When turning (power) on the radio by pressing a button on it, the radio may enter into a
special modes in which transmission and reception is impossible. Please don’t turn on the radio by
above way.
Figure 6-1) User ID
6.2 Transmission Method
For transmission, press PTT button on the left side of the radio. As soon as the user presses keys
according to the setting, DTMF or 5-tone ID will be transmitted, and during this time, voice
communication will be interrupted for several seconds. Then, red LEDs for transmission and reception
will be turned on. It is recommended to talk 5 ~ 10cm away from the microphone for the best voice
communication.
.
☞
Note: If the user makes transmission for more than a certain time while BCLO or TOT feature is on,
transmission will be forcefully disconnected for other users.
☞
Caution) If present channel is TX Inhibited by pc program, TX will not be worked.
(By PC Program, it could be set)
Figure 6-2) When receiving Figure 6-3) When transmitting
