Yenista Optics TUNICS T100S-HP, Руководство пользователя

Страница: 9 / 66

TUNICS T100S-HP User Manual 9
Safety Information
Safety Labels and Symbols on the Product
Table 1: Safety Labels and Symbols
Ventilation of the product
Your safety may be compromised if you do not use the product in
accordance with the instructions given in this manual and on the labels
located on the product.
Safety Label Description
Laser Warning Labels
The warning symbol indicates the location of the laser
source. It is accompanied by an explanatory label.
Class 1M Laser Product
The product has a built-in light source, which makes it a
class 1M laser product, as defined by the standard on
safety of laser products (see section Certification and
Compliance, p. 59). This means that it is safe under all
conditions of normal use except when viewed with
optical instruments such as microscopes and telescopes.
Class 1M lasers produce large-diameter beams, or
beams that are divergent.
Electrical Safety Label
This label indicates an injury hazard. It appears on a
location that requires special instructions for proper use:
you must consult the documentation before using the
element of the product where this symbol is marked
(see section Unpacking and Installing the Product,
p. 21).
• Make sure there is sufficient clearance below and at the back of the
product to ensure proper ventilation. The apertures (under the product)
and the fan (behind the product) are used for the inside ventilation.
• If you plan to rack-mount this product, make sure to allow at least a 15-
mm (0.6 inches) gap between two products.
WARNING
AVOID EXPOSURE
Invisible laser radiation is
emitted from this aperture
Class 1M Laser Product
Invisible Laser Radiation
Do not view directly with
optical instruments
IEC 60825-1:2007
Complies with FDA
performance standards for
laser products except for
deviations pursuant to Laser
Notice N°50 (June 24, 2007)
FUSE 4.0A, 250V, SLOW(T)
TO AVOID ELECTRIC SHOCK, THE
PROTECTIVE GROUNDING CONDUCTOR
MUST BE CONNECTED TO GROUND
100-240V ±10% C ATII ~50-60Hz POWER MAX 220W
!
CAUTION