Yenista Optics TUNICS T100S-HP, Руководство пользователя

Страница: 19 / 66

Product Presentation
TUNICS T100S-HP User Manual 19
Inputs
• HF Mod : SMA connector for high-frequency modulation input.
• LF Mod : BNC connector for low-frequency modulation input.
• FSC : BNC connector for fine scanning and coherence control.
• Remote Interlock : SUBD-9 connector for laser safety (safety interlock is mandatory
for Class 3B and 4 laser products. Note that the TUNICS lasers are Class 1M)
.
For a detailed description on particular connectors, see section Using the Auxiliary Inputs
and Outputs, p. 43.
Remote Interfaces
• RS-232 C remote control (SUBD-9 connector).
• GPIB remote control (IEEE-488.1 connector).
Remote commands are available in TUNICS T100S-HP Programming Guide .
Labels
Label Description
Identification of the Product
Indicates serial number, model number, options (if any),
and date of manufacture.
Manufacturer Identification
Contact Information of the manufacturer.
Class 1M Laser Product
The product has a built-in light source, which makes it a
class 1M laser product, as defined by the standard on
safety of laser products (see section Certification and
Compliance, p. 59 ). This means that it is safe under all
conditions of normal use except when viewed with
optical instruments such as microscopes and telescopes.
Class 1M lasers produce large-diameter beams, or
beams that are divergent.
Electrical Safety Label
This label indicates an injury hazard. It appears on a
location that requires special instructions for proper use:
you must consult the documentation before using the
element of the product where this symbol is marked
(see section Unpacking and Installing the Product, p. 21
).
MANUFACTURED
OPTIONS
MODEL
SERIAL NUMBER
Made in France
xxxxxxxx xxxx
TUNICS T100S-HP
xxxxxxxxxxxx
xxxxxxxxxxxx
Manufactured by:
4, rue Louis de Broglie www.yenista.com
22300 LANNION Tel : +33 2 96 48 37 15
France Fax : +33 2 96 48 73 04
Class 1M Laser Product
Invisible Laser Radiation
Do not view directly with
optical instruments
IEC 60825-1:2007
Complies with FDA
performance standards for
laser products except for
deviations pursuant to Laser
Notice N°50 (June 24, 2007)
FUSE 4.0A, 250V, SLOW(T)
TO AVOID ELECTRIC SHOCK, THE
PROTECTIVE GROUNDING CONDUCTOR
MUST BE CONNECTED TO GROUND
100-240V ±10% C ATII ~50-60Hz POWER MAX 220W
!