Page 2 of 6
14.06.2011
SHOF-10-e
Rev Nr:1
READ THIS MANUAL BEFORE INSTALLING THE SHUT-OFF VALVE
The proper operation of the shut-off valve depends on correct installation and regular maintenance. Please
read all warnings and follow the instructions carefully. Failure to follow the below precautions and the warning
instructions in this manual will violate all warranties and may result in environmental contamination due to
liquid leakage to the soil, creating hazardous spill conditions. Follow all rules, codes and laws that apply to
your area and installation.
Contact Yenen
Trouble in installing and maintenance of the shut-off valve should be referred to your authorized Yenen dealer
or to Yenen technical support (+90 216 487 5924).
Explanation of symbols
Notice: indicates a special comment or instruction.
Warning: Indicates the presence of a hazard that can cause severe personal injury or property
damage if not observed carefully.
This manual provides instructions and guidelines. The remarks and warnings inform the operator of
the hazards involved in installing and handling shut-off valves. Reading these instructions and
preventing hazardous situations is strictly in the hands of the operator of the equipment. Neglecting
this responsibility is not within the control of Yenen.
No part of Yenen manuals may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form, by any means, without Yenen’s prior written permission.
Yenen reserves the right to change the specifications of the products described in this manual at any time and
without prior notice.
Yenen cannot and will not be held liable for any damages resulting from the use of this product.
While every effort has been made to ensure that the information in this manual is accurate and complete, Yenen shall
not be held liable for errors contained herein or for incidental or consequential damages in connection of the use of
this manual.
The logo(s) of Yenen Engineering Ltd. are property of Yenen Engineering Ltd.
Yenen Engineering Ltd. is ISO9001:2008 certified. For a copy of Yenen’s quality policy and / or Yenen’s HSE policy,
please, visit www.yenen.com or send an email to [email protected] or fax your request to +90 216 487 5986.
