YEECORE D12, Руководство пользователя

Страница: 19 / 38

15
2. Mount the rear cam to the rear windshield.
3. Connect the rear cam to the front cam.
Tear off the paper from the electrostatic film's another side.
Tear off the paper from the adhesive tape on the rear cam.
Attach the 3M adhesive tape on the rear cam onto where the
electrostatic film mark out, to make it stable.
Connect the rear cable to the rear cam.
Insert the rear cable into the rear cam Type-C port.
※ Attention ： Adjust the "YEECORE" logo on the rear cam to face you
and make sure the "YEECORE" logo is not upside down. Otherwise,
the rear image will be upside.
※ For best results, leave the rear cam in place for at least 24 hours and
don't pull until the 3M adhesive tape is firmly attached.
Make sure that the rear cam doesn't cover with the rear windshield
heating wire.
2-1
2-2
2-3
3-1