Yedoo Dragstr, Руководство пользователя, Страница: 8 / 40

8
Installation manual
2. 3. 1.
The installation is the same for all
models (Dragstr, Rodstr, Friday,
Frida & Fred), it differs only in minor
details (see additional pictures). When
tightening the connections do not
exceed the specified tightening torque.
Installing the front wheel
Insert the quick release mechanism into
the wheel ensuring that on both sides of
the wheel the narrow ends of the springs
face the centre of the wheel.
First check that the front fork of the
scooter is aligned correctly (the V-brake
arms should be pointing forwards
towards the front of the scooter), then
release the brake cable from the guide. Insert the wheel into the front fork so it
is exactly in the middle.
Caution: When
inserting the wheel, ensure that the
arrow on the tyre sidewall points in the
direction of rotation when the scooter
is rolling forwards.
5. 4.
Tighten the adjustment nut of the
quick release mechanism to the correct
position. When it is in the correct
position you will feel a noticeable
resistance just before you close the
mechanism completely. Close the
quick release lever in a position
so it does not touch the fork and
simultaneously it cannot be opened
accidentally while riding. Handlebars installation
Install the handlebar on the stem.
Tighten the screws only slightly so you
can adjust the angle of the handlebars
later on.
Dragstr
5–6 Nm
EN
Direction
of rota-
tion
Rodstr
6–8 Nm
Friday
Frida & Fred
6–8 Nm
DRF+Frida_manual-PANTONE.indd 8 22.06.18 10:43