Yedoo Dragstr, Руководство пользователя, Страница: 11 / 40

11
EN
1. 2. 3.
Assembling the stand
The stand is not included. You can
purchase it together with other Yedoo
accessories at your local dealer.
See www.yedoo.eu.
Mount the stand in the area where the
front profile of the frame is spread out.
For the best stability for a given model,
choose the right height for mounting
the stand. The stand should not extend
outside the frame of the scooter when in
the riding position. The maximum capacity of the stand is
about 15 kg. Do not stand on the parked
scooter.
14. 15.
Adjusting the bowden cables
Adjust the position of the cables and
make sure they do not extend outside
the frame of the scooter (especially in
the rear fork area).
Anti-slip tapes
Use the spare anti-slip tapes to enhance
the anti-slip effect of the footrest. You
can easily stick them onto the empty
slots of the footrest.
Caution: Clean and
degrease the footrest thoroughly before
installation.
13.
Fasten the end of the brake cable in
the lock and secure with the cable tie,
then trim the tie.
DRF+Frida_manual-PANTONE.indd 11 22.06.18 10:44