![background image](http://html.mh-extra.com/html/yedoo/alloy-series/alloy-series_user-manual_909757006.webp)
6
EN
2.
5.
3.
1.
4.
The installation is the same for both
models (Wolfer, Trexx), it differs only in
minor details (see additional pictures).
When tightening the connections do not
exceed the specified tightening torque.
Installing the front wheel
Insert the quick release mechanism into
the wheel ensuring that on both sides of
the wheel the narrow ends of the springs
face the centre of the wheel.
Tighten the adjustment nut of the
quick release mechanism to the correct
position. When it is in the correct
position you will feel a noticeable
resistance just before you close the
mechanism completely. Close the quick
release lever in a position where it does
not touch the fork and simultaneously
it cannot be opened accidentally
while riding.
Handlebars installation
Insert the handlebars on the stem
and tighten the screws of the sleeve.
The labels (not shown in a picture)
should be clearly visible from the
front view.
First, check that the front fork of the
scooter is aligned correctly (the V-brake
shoulders should be pointing forwards
towards the front of the scooter), then
release the brake jaws by rotating
the lever.
Insert the wheel into the front fork so it
is exactly in the middle.
Caution:
When
inserting the wheel, ensure that the
arrow on the tyre sidewall points in the
direction of rotation when the scooter
is rolling forwards.
Wolfer
Trexx
5–6 Nm
5–6 Nm
Installation manual
Direction
of rotation
Содержание ALLOY Series
