Yeastar Technology TG Series Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 51

Yeastar Technology TG Series Скачать руководство пользователя страница 38

NeoGate TA410/810 User Manual

38/51

no DID info. You can also use pattern matching to match a

range of numbers.

DID Associated

Number

Define the extension for DID number. You can only input

number and “-” in this field, and the format can be xxx or

xxx-xxx. The count of the number must be only one or equal the

count of the DID number.

Enable Call Back

Choose whether call back is enabled. NeoGate TA allows caller

A to dial an inbound route number, and after hearing the ring,

Acan hang up the call cut off the call, then NeoGate TA will call

back to A.

Hotline

Set the hotline number. If hotline number is configured, TA will

route the incoming call to the hotline number directly.

Two Stage Dial

Enable it to get the customized two stage dial tone before

dialing out, it’s disabled by default.

Dial Pattern Template

Choose the Dial Pattern template.

4.2 VoIP Settings

To integrate with other IPPBX, we need to configure the VoIP settings in NeoGate TA to

setup VoIP trunk (SIP and IAX).

4.2.1 VoIP Server Settings

There are some configurable VoIP (SIP/IAX) Server templates on this page. The number

of VoIP Server templates is the half of FXO ports on NeoGate. The VoIP server settings

help the FXO ports to register to the VoIP server. Once configured, the templates can be

chosen on FXO port setting page.

Two modes are available for the VoIP server, we call them VoIP mode and SPS (Service

Provider SIP)/SPX (Service Provider IAX) mode.

VoIP Mode:

The FXO port will be registered as one the VoIP server's SIP extensions if "Enable

Register" is checked on VoIP Server template.

SPS/SPX Mode:

If "Enable Register" is not checked, the FXO port will be registered as a SPS/SPX trunk to

the VoIP Server. One SPS/SPX trunk to NeoGate TA also should be created on the VoIP

Server.

«
...
36
37
38
39
40
...
»

Содержание TG Series




















































Отзывы:

Нет отзывов