NeoGate TA410/810 User Manual
35/51
Port→IP
On this page, you can specify how to route the calls from PSTN trunk to IPPBX. There are
two modes for you to configure that.
1) Simple Mode
All you need to configure in simple mode is to choose the dial pattern template.
Figure III-4-
3 Port→IP Simple Mode
Duration
Min Ring
Detection
Enable Min Ring Detection, which is useful for
complex situations, like when jitter or noise occurs
on the PSTN line.
Generally it is disabled.
Min Ring Duration Min duration of the received tone.
Min Ring Interval
Duration
Min pause between the two received tones.
Caller ID
Setting
Caller ID
Detection
Enable or disable caller ID detection.
Caller ID Start
This option allows one to define the start of a caller
ID signal.
Ring: start to detect when a ring is received
Polarity: start to detect when a polarity reversal is
started
Before Ring: start to detect before a ring tone
Caller ID
Signaling
This option defines the type of caller ID signaling to
use.
Bell-USA: US standard
V23-UK: UK standard
V23-Japan: Japanese standard
V23-Japan Pure: Japanese standard
DTMF: DTMF signal
Please check with your PSTN service provider to
configure Caller ID Settings. If you don’t know how
to configure, please contact Yeastar support.
Other
Settings
Ring Detect
Timeout
There should be a timeout to determine if there is a
hang up before the line is answered. Range from
3000 to 8000. Default is 8000 ms.