![background image](http://html2.mh-extra.com/html/yeastar-technology/ta100/ta100_user-manual_3243141045.webp)
TA100/200 User Manual
45/52
Note:
if there is no user name and password for the server, leave these fields blank.
Figure 10-7 Server Address
AES Key
If the configuration file is encrypted by AES key, you need to fill the key in this
field.
Always Apply
With No, it will compare the current configuration file with the last updated one, if
the contents are the same no update will be applied. With Yes, it will always apply
the updated configuration file.
Firmware Update
TA100/200 can be upgraded to a new firmware version via network or locally. Users
could upgrade firmware via HTTP or TFTP. Please go to
System→ System
Preferences→ Firmware Update
to do upgrade.
Notes:
1.
If “Reset configuration to Factory Defaults” is enabled, the system will be restored
to factory default settings.
2. When updating
the firmware, please don’t turn off the power. Or the system will
be damaged.
3. If you are trying to upgrade through HTTP, please make sure that your TA100/200
is able to visit external network, or it cannot access Yeastar website to get the
firmware file, causing the upgrade fail.
Upgrade through HTTP
On the Firmware Upgrade page, choose
HTTP URL
.
Step1.
Enter the download link of the firmware file.
Note:
the HTTP URL should be a
BIN
file download link.