TA100/200 User Manual
20/52
Gateway Settings
This chapter explains Gateway settings, which can be applied globally to TA100/200.
The gateway settings can be configured under
Gateway
→ Gateway Settings
.
Basic Preferences
Figure 6-1 Basic Preferences
Table 6-1 Description of Basic Preferences
General Settings
Key As Send
Set the "#" or "*" to perform as a send key while
dialing. Default is "#". Or you can disable it.
Virtual Ring Back Tone
Once enabled, when the caller dials out, the caller will
only hear the virtual ring back tone generated by the
system before the callee answers the call.
Enable Call Logs
Whether to store call logs in the system:
Yes: the system will store the call logs.
No: the call logs will not be kept anymore, but the
call logs stored previously will still be there.
Voice Settings
Enable Jitter Buffer
Forces the use of a jitter buffer on the received side of
a SIP channel. The call quality and fluency will be
improved if this option is enabled.
Jitter Buffer MaxSize
Max length of the jitter buffer. Default is 40
milliseconds. The more size, the more delay of the
voice have, but will have better fluency of the voice.
Usually adjust to a proper number as you experienced.