How to Connect Yeastar TA FXS Gateway to 3CX
Step 4. Edit the FXS port
Path:
Gateway
→
FXS Port List
→
FXS Port List
Figure 7. Edit the FXS Port
Primary Server:
choose “3CX(1)”, the VoIP server template configured in Step 2.
User Name:
the extension username on 3CX phone system, 100.
Authentication Name:
the extension authentication name on 3CX phone system,
100.
Password:
the authentication password of the extension on 3CX phone system,
64s4m99.
Dial Pattern Template:
choose the Dial Pattern Template DialPatternTemplate1(1).
Save and apply the changes, and you will see the port status is ‘Registered’ on "Port
Status" page.
Path
: Status
→
System Status
→
Port Status
Figure 8. Port Status
Now, you are able to use the analog phone which is connected to Yeastar TA's FXS
port 1 to make calls and receive calls.
Note:
All outgoing calls to 3CX extensions and to external numbers through trunks on
3CX should match the dial pattern, or calls will be failed.
7/14
