TA Series Installation Guide
15/17
4.2 Logging in the Web Configuration Panel
Start the browser on PC. In the address bar, enter the IP address, click
“Enter” button
and then you can see Web Configuration Panel login page. Enter the Admin User
Name and Password to log in.
Figure 4-2 TA Web Configuration Panel Login Page
Via the configuration interface, the admin can make all the system configurations,
including network settings (LAN, WAN, Firewall, VPN, DDNS, VLAN, etc.); system
parameters configuration (time zone, password, etc.); internal settings (Web access
port, etc.); FXS ports list; FXO ports list; Hunting Groups; Hotline; call logs (search,
download); firmware update and reset, etc.
Note:
after saving the changes, remember to click
the “Apply changes” button to
make the changes take effect.
4.3 Network Settings
After logging in the admin configuration interface, generally the first step is to
configure the IP address. If the LAN ports are connected to the network, their IP
addresses need to be configured. If not, just configuring the IP address of the LAN
port which is connected to the local area network of the company is OK.
LAN Settings
Click “Network Preferences”→ “LAN Settings” on the left menu bar of the web
configuration interface. LAN port is used for the interoperability of IP terminals
and . If the LA
N port is connected to the company’s LAN, please configure the
correct IP address and corresponding subnet mask.