TG100 User Guide
23/75
Trunk
, click
Add VoIP Trunk
.
b. Set
Trunk Type
to
Trunk
.
c. Choose a protocol from the
Type
field. The protocol should be the same as the
PBX extension’s protocol.
d. Set a
Provider Name
.
e. Enter the PBX’s IP address or domain in
Hostname/IP
or
Domain
field.
f. Enter the PBX extension’s number in
User Name
and
Authorization Name
fields.
g. Enter the PBX extension’s password in
Password
field.
h. (Optional) Click
Advanced
tab to configure the advanced settings.
Option
Description
From User
All outgoing calls from this SIP Trunk will use the From User in
From Header of the SIP Invite package. Leave this field blank if
not needed.
Online Number
Define the online number for “Skype Connect” and some other
SIP service providers. Leave this field blank if not needed.
Maximum Channels
Control the maximum number of simultaneous calls, set as 0 to
specify no limit.
Caller ID
Specify the caller ID to use when making outbound calls over
this trunk.
Enable SRTP
Define if SRTP is enabled for this trunk, it depends on
provider’s configuration.
Qualify
Send check alive packets to the SIP provider.
Enable outbound
proxy server
A proxy that receives requests from a client, even though it
may not be the server resolved by the Request-URI.
Codec
Define the codec for this SIP trunk and its priority.
Transport
This will be the transport method used by the SIP Trunk. This
method is given by the SIP trunk provider.
UDP
TCP
TLS
DTMF Mode
Set default mode for sending DTMF of this trunk. The default
value is rfc2833.
DOD settings
DOD (Direct Outward Dialing) means the caller ID displayed
when dialing out.
Note
: Make sure provider supports this feature before
configuring the setting.
3. Click
Save
and
Apply Changes
.
