NeoGate TG Series Installation Guide
11/16
3. NeoGate TG Series Installation
To avoid unexpected accident, personal injury or device damage, please read the following
instructions before installing NeoGate TG Series Gateway.
3.1 Placement Instructions
‹
Ambient Temperature: to avoid overheating, please do not run NeoGate TG Series in the
place where the ambient temperature is above 104°F (40°C).
‹
Ventilation: please make sure that the device has good ventilation around.
‹
Anti-jamming: there may be some sources of interference that might affect the normal
running of NeoGate. It’s highly recommended that the device
¾
Should be placed away from high-power radio, radar transmitters and high frequency,
and high-current devices.
¾
Is using independent power junction box and effective anti-grid interference measures
have been taken.
‹
Mechanical load: Please make sure that the device is placed steadily to avoid any accident
that might cause damage. If placed on the desktop, please ensure it is horizontally placed.
‹
Radio frequency: because of the radio frequency, please put the device at least 50 cm away
from human
body.
3.2 Installation Instructions
After placing NeoGate in a suitable place, please connect the power adapter and all other cables
to complete the installation.
3.2.1 Connection of Ethernet Ports
NeoGate TG Series provides one 10/100M adaptive RJ45 Ethernet LAN port.
‹
LAN Port Connection
Connect one end of a network cable to the LAN port of NeoGate, and the other end to any
port of company’s LAN switch/router.
If the LAN port is connected to PC directly (not via a switch), please use cross-over cable.
3.2.2 Connection of GSM ports
NeoGate TG Series, available with four models, supports 1, 2, 4, 8, 16 GSM ports. To use the GSM
ports, you need to insert the SIM card and connect the antenna.
