TA410/810 User Manual
36/63
incoming calls.
Dial Tone
Prompt tone of off-hook dial tone.
Ringback Tone
The tone sent to caller when ringing is on.
Busy Tone
Used for busy line prompt.
Call-Waiting Tone
Used for notification in call waiting.
Congestion Tone
Used to indicate that an invalid code has been dialed, or that all
circuits (trunks) are busy and/or the call is unroutable.
2nd Dial Tone
Used for the second stage dial tone.
DTMF Settings
DTMF signal sent from TA410/810 to the receiver can be set on this page.
Digit Length and Dial Pause Between Digit: 100.100 (ms)
Default Digit Volume: -10,-10 (dB)
Figure 8-3 DTMF Settings
Содержание NeoGate TA810
Страница 10: ...TA410 810 User Manual 10 63 Figure 2 3 Connect TA FXO Gateway and FXS Gateway...
Страница 16: ...TA410 810 User Manual 16 63 Figure 3 4 Port Group...
Страница 32: ...TA410 810 User Manual 32 63 Figure 5 6 Callback Settings...
Страница 58: ...TA410 810 User Manual 58 63 Figure 11 12 Reset and Reboot...