Yeastar Technology MyPBX U300 Скачать руководство пользователя страница 96

Страница: 96 / 129

MyPBX U300 Administrator Guide

5) T.38

Figure 17-3 T.38 Settings



Re-invite SDP Not Add T.38 Attributes

If set to Yes, SDP in re-invite packet will not add T.38 attributes.



Error Correction

Set the Error Correction Mode (ECM) for the Fax.



T38 Max BitRate

Set the maximum transfer rate during the Fax rate negotiation. The possible

values are 2400, 4800, 7200, 9600, 12000 and 14400. The default setting is
14400.

6) Advanced Settings

Table 17-2 SIP Advanced Settings

Advanced Settings

From Field

Where to get the caller ID in SIP packet.

To Field

Where to get the DID in SIP packet.

180 Ringing

It is set when the telecom provider needs. Usually it is not needed.

Remote Party ID

Whether to send Remote-Party-ID on SIP header or not.

Default: no.

Allow Guest

Whether to allow anonymous registration extension or not. Default:

no.

This option is used to avoid some anonymous calls by hackers.

Pedantic

Enable pedantic parameter. Default: no.

Alwaysauthreject

If enabled, when MyPBX rejects

“Register” or “Invite” packets,

MyPBX always respond the packets using

“SIP404 NOT FOUND”.

OPTIONS

Response 200

If set to yes, the response to an OPTIONS is always 200 OK.

Session timers

Enable session-timer mode, default: yes.

Session-expires

The max refresh interval.

Session-minse

The min refresh interval, which mustn't be less than 90s.

Session-refresher

Choose session-refresher, the default is Uas.

Содержание MyPBX U300


































































































































Результаты поиска

Содержание MyPBX U300

Отзывы:

Похожие инструкции для MyPBX U300

Бренды по названию

Популярные бренды

Yeastar Technology MyPBX U300, Руководство администратора

Результаты поиска

Содержание MyPBX U300

Отзывы:

Похожие инструкции для MyPBX U300

Бренды по названию

Популярные бренды