MyPBX U300 Administrator Guide
109
Net-Disk Host/IP
: setthe IP address of the computer where backup files will
be stored.
Net-Disk Share Name
: fill in the name of the shared folder where backups will
be stored.
Net-Disk Share Username
: set the user name used to log into the network
share. Leave this blank if it is not required
Net-Disk Share Password
: set the password used to log into the network
share.Leave this blank if it is not required.
If the configuration is correct, MyPBX backup files and folders will be created in the
shared folder.
Password Settings
It is highly recommended to change the system
’s password after first login. Go to
System→System Preferences→Password Settings
to change the password.
There are 3 accounts for MyPBX U300:
“admin”, “user” and “cdr”. Accounts “user” and
“cdr” are disabled by default.
Default password for the 3 accounts are all
“password”.
Follow the steps to change password:
1. Enter the old password first.
2. Enter a new password and retype the new password to confirm. The password
complexity will be detected, which will help users to set a strong password and
make MyPBX U300 safer. A strong password is comprised of letters, numbers and
characters.
3. Save the changes, the user will be automatically logged out.
4. Log in MyPBX U300 using the new password.
Figure 20-5 Password Settings
Note:
the administrator could change other accounts
’ password without entering
the old password.
Date and Time
Please adjust the time of MyPBX U300 (including the time zone) consistent with your
localtime. Go to
System→System Preferences→Date and Time
to configure the