Yeastar Technology MyPBX Standard Скачать руководство пользователя страница 37

Страница: 37 / 123

MyPBX Standard Administrator Guide

Domain

VoIP provider

’s server domain name.

If no domain name for the provider. Fill in the IP address

instead.

User Name

The user name to register to the trunk from the VoIP provider.

Authorization Name

Used for SIP authentication.

Password

The password to register to the trunk from the VoIP provider.

From User

All outgoing calls from this SIP Trunk will use the From User (In

this case the account name for SIP Registration) in From

Header of the SIP Invite package.Keep this field blank if not

needed.

Online Number

Define the online number that expected by

“Skype Connect”and

some other SIP service providers. Leave this field blank if not

needed.

Maximum Channels

Control the maximum number of outbound channels

(simultaneous calls) that can be used on this trunk. Inbound

calls are not counted against the maximum. Set as 0 to specify

no maximum.

Caller ID

Specify the caller ID to use when making outbound calls over

this trunk. The caller ID set in the

“Extension” page will override

the caller ID set in the

“VOIP trunk” page. Please note that not

all the service providers support this feature. Contact your

service provider for more information.

Realm

Realm is a string to be displayed to users so they know which

username and password to use.

Authenticating

Incoming



Yes

: when an incoming call reaches MyPBX Standard and

sends INVITE packet to MyPBX Standard, MyPBX

Standard responds 401, but the Realm info in 401

Response does not match theRealm set on VoIP trunk, the

provider will refuse to authenticate.



:MyPBX Standard will not reply a 401 Response to the

provider toauthenticate the incoming call.

Enable Outbound

Proxy Server

A proxy that receives requests from a client. Even though it may

not be the server resolved by the Request-URI.

Codecs

Define the codec for this sip trunk and its priority

Transport

This will be the transport method used by the SIP Trunk. This

method is given by the SIP trunk provider.

Enable SRTP

Define if SRTP is enabled for this trunk.

Qualify

Send check alive packets to the sip provider.

DTMF Mode

Set default mode for sending DTMF of this trunk.Default setting:

rfc2833.

2) DOD Settings

DOD (Direct Outward Dialing) means the caller ID displayed when dialing out.

Содержание MyPBX Standard




























































































































Результаты поиска

Содержание MyPBX Standard

Отзывы:

Похожие инструкции для MyPBX Standard

Бренды по названию

Популярные бренды

Yeastar Technology MyPBX Standard, Руководство администратора

Результаты поиска

Содержание MyPBX Standard

Отзывы:

Похожие инструкции для MyPBX Standard

Бренды по названию

Популярные бренды