Yeastar Technology MyPBX Standard Скачать руководство пользователя страница 18

Страница: 18 / 123

MyPBX Standard Administrator Guide

email address.



Enable Send Voicemail

Wether to send voicemail to email or not.



Email Address

“Voicemail to Email” is enabled, fill in the email address

where to send the voicemail.

Note:

lease ensure that the section “SMTP Settings for

Voicemail”(in the “Voicemail Settings”) have been properly

configured before using this feature.

Flash

Sets the amount of time, in milliseconds, that must pass since

the last hook-flash event received by MyPBX Standard before it

will recognize a second event. If a second event occurs in less

time than defined byHook Flash Detection, then MyPBX

Standard will ignore the event. The default value of Flash is

1000 ms.

Pickup Group

If this extension belongs to a pickup group, any calls that ring

this extension can be picked up by other extensions in the same

pickup group by dialing the Call Pickup feature code (the default

is *4).

Note:

*4 is the default setting, it can be changed under

Feature

Codes→ General → Call Pickup

Max Call Duration

Setup the max cull duration for every call of this extension, but
it’s only valid for outbound calls. Enter “0” or leave this blank

empty, the value would be equal to the max call duration

configured in the Option Settings page.

Note:

this setting will not be valid for internal calls.

2) Advanced Settings

Table 4-2 FXS Extension Configuration- Advanced Settings

Items

Description

Call Waiting

Check this option if the extension should have Call Waiting

capability. If this option is checked, the

“When busy” follow me

options will not be available. The call waiting function of IP

phone has higher priority than MyPBX Standard

’s call waiting

function.

DND

Don’t Disturb. When DND is enabled for an extension, the

extension will not be available.

User Web Interface

Check this option to allow the user to log in to the MyPBX User

Web interface, which can be used to access voicemail and

extension recordings. Users may log in the MyPBX User Web

interface by using their extension number and voicemail PIN as

the user name and password respectively.

Ring Out

Check this option if you want to customize the ring time. Ring

Содержание MyPBX Standard




























































































































Результаты поиска

Содержание MyPBX Standard

Отзывы:

Похожие инструкции для MyPBX Standard

Бренды по названию

Популярные бренды

Yeastar Technology MyPBX Standard, Руководство администратора

Результаты поиска

Содержание MyPBX Standard

Отзывы:

Похожие инструкции для MyPBX Standard

Бренды по названию

Популярные бренды