Yeastar Technology MyPBX-SOHO, Руководство администратора, Страница: 133 / 204

MyPBX SOHO Administrator Guide
133/204
APPENDIX A FAQ
Q1. How to Register SIP device?
A1:
1) Register SIP soft phone
Download the x-lite softphone from CounterPath website
www.counterpath.com
After installing the x-lite, right click the panel and select the SIP Account setting and then
configure it.
Display Name : 500
User Name : 500
Password : 500
Authorization Name : 500
Domain : 192.168.5.150
2) Register IP Phone (for example, Yealink’s T28 IP Phone)
a) Connect the T28’s Internet port to the switch. And it can get the IP from your route.
b) Press the “OK” key on T28 to get the IP of T28.
c) Put the IP on web browser then you can enter the T28 configure page through this IP.
d) Put the SIP extensions info on the T28 IP phones.
Display Name : 501
User Name : 501
Register Name : 501
Password : 501
SIP Server : 192.168.5.150
Use the same method register another T28 to other extension.
Q2. How do I reset MyPBX back to the factory default settings?
A2: To perform a reset, please follow the steps below:
Step 1: Press down the “Reset” button on the back of the unit for 5 seconds and watch the
LEDs on the front of the MyPBX. When the status LED turns red, let go of the reset button.
Step 2: When the RUN status LED starts blinking, MyPBX will be set back to factory
defaults.
Step 3: To access the configuration page, navigate to 192.168.5.150 using a Web
browser. Make sure that you are on the 192.168.5.0 subnet before doing this.
Step 4: Login to the device with the username “ admin ” and the password “ password ”, and
reconfigure the device.
APPENDIX B How to Configure External Storage
Before External storage can be properly configured, an SMB share folder accessible from
MyPBX must be set up on a Windows based machine. Once that has been set up, please
follow the steps below.