Advanced Phone Features
77
In the following figure, the phone LCD screen shows an incoming call from 3606 on the
monitored line.
Note
When there is an active call on the IP phone, you can transfer the active call to the
monitored phone number directly by pressing the BLF key. The phone transfers the
active call differently depending on the transfer mode on DSS key.
To configure the transfer mode on DSS key via web user interface:
1.
Click on
Features
->
Transfer
.
2.
Select the desired transfer mode from the pull-down list of
Transfer Mode via
DSSkey
. Depending on your selection:
-
If you select
Blind Transfer
, press the BLF key to blind transfer to the monitored
phone number.
-
If you select
Attended Transfer
, press the BLF key to dial out the monitored phone
number and then you can perform the attended or semi-attended transfer.
-
If you select
New Call
, press the BLF key to place a new call to the monitored user.
3.
Click
Confirm
to accept the change.
For more information on performing call transfer, refer to
Call Transfer
on page
65
.
Call Recording
You can record calls by pressing a record key on the SIP-T42G IP phone. There are 2
different ways of configuring call recording and they even work differently:
z
Record
: The phone sends SIP INFO message containing a specific header “Record:
on/off” to trigger a recording.
z
URL Record
: The phone sends HTTP URL request to trigger a recording. Contact your
system administrator for the predefined URL.
If your phone is locked and the type of the keypad lock is set to be
Function Keys
or
All
keys
, you cannot use the
Pickup
,
Dial
,
New Call
and
Cancel
soft keys appear in the
figure above until unlocked.
All manuals and user guides at all-guides.com
