BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE
20-BD5561-00
©
2018 BROADSOFT INC.
PAGE 47 OF 117
To assign the device profile to the user, browse to the
BroadWorks <user> → Addresses
.
5.2.5 Configure Edge Device
In many deployments, an edge device is deployed on the enterprise edge. Configure the
edge device SIP server setting with the service provider’s Session Border Controller IP
address or FQDN. If there is no edge device and the phones communicate directly with
the service provider’s SBC, skip this section.
To integrate the edge device with Device Management, the SBC address tag
(%SBC_ADDRESS%) defined in section
5.2.1.1 Create System Default Tags
overridden at the group level with the LAN address of the edge device. At the
Group
→
Utilities
→
Device Configuration
page, select the Yealink device profile (example: Yealink-
W60B). Perform the following steps.
1)
Click on the
Custom Tags
tab.
2)
Click the
Add
button.
3)
Add the
SBC
tag.
4)
Enter “SBC_ADDRESS” as the tag.
5)
Enter the IP address as the value (edge device LAN IP address).
6)
Click
OK
to save the tag data.
This Tag/Value will be applied to all Yealink W60B phones in the group using the modified
Device Profile Type
.
5.2.6 Configure Yealink W60B IP DECT PHONE
This section describes the steps necessary to configure the Yealink W60B to integrate
with BroadWorks Device Management.
The phone must be configured with the Device Management URL and authentication user
name and password. This configuration can be accomplished as described in the
sections:
5.2.6.1 Manual Provisioning
Log in to the web user interface for the W60B IP DECT PHONE (https://<phone-ip-
address>). Go to the
Settings
→
Auto Provision
web page and set the following:
Power On – On
URL – Device Management server (Xtended Services Platform) device address URL
Example: http(s)://xsp1.iop1.broadworks.net:80/dms/Yealink_W60B/
HTTP Authentication:
User Name – BroadWorks Device Access (Example: yealink)
Password – BroadWorks Device Access Password (Example: 123456)
Restart the phone to force the phone to download the Device Management configuration
files and firmware.