1. QUICK DETAILS
Default PIN = 0000
Register a handset to a base:
On the phone: [ok] (menu)
> Settings > Registration > Register Handset > Select
Base > Phone will begin searching > Press and hold
Wireless button on Base Station > Confirm registration
on Phone
Power Cycling:
It takes about 30 seconds for a base
unit to come online and register, as indicated in the three
lights, which sequentially lock after flashing. [Power] >
[Network] > [Phone Service]
Handsets are quickly synchronized with the base station
and should automatically connect once the base station
is online.
Immediately after making changes to Call Features which
impact the Customer Admin Portal, the phone may need
to Synchronize with the Switch, and may be unable to
make/receive calls momentarily (seconds).
“Incoming Lines”:
Settings can be set to “ignore” calls,
resulting in Cannot Receive Calls. This is device-specific
and does not show up on the portal or other phones.
Caller Blacklist:
This is a telephony setting specific to
the Yealink handset. It acts as a Base station-specific
“Selective Call Rejection,” which prevents calls from
completing to the Yealink Handsets. However, calls will
still complete to other devices (mobile, Polycom and/or
desktop).
Intercom automatically interfaces handsets that
are registered to the base unit. Intercom will offer
the intercom as a call to be answered, unless Auto-
answer intercom is enabled from system settings.
TABLE OF CONTENTS
4. Menus
6. Phone Menu
